Please download file HERE!
NOTE:
Battery calibration must be performed after this update to allow for improved battery level measurement.
You can find Update instructions HERE!
What's New in Version 1.1.0:
- DMX Transmitter setting saved and loaded on power-cycle
- Added real-time clock feature (used for filesystem)
- Added pin-protected ownership message
- Added touchscreen calibration in settings menu
- Improved RDM device listing and added option to hide offline devices (on by default)
- Protocol detector moves active protocols to top of list
- PoE tests improved and results now show failure causes
- Menu can now be navigated using keypad (press central key to activate)
- Added battery storage preparation feature that charges/discharges battery to safe level for long-term storage
- Battery level measurement precision improved
- Note: Battery calibration must be performed after firmware update
- Discharge battery completely and allow the unit to power down itself. Leave the unit in this state for at least 5 hours
- Then, fully charge the battery and leave it connected to charger for at least 5 hours
- DMX transmitter now does not allow two sources for the same universe
- DMX receiver handles less than 512 channel streams properly
- DMX receiver handles sACN 0xDD start codes
- DMX receiver FPS counter erratic behavior fixed
- User interface typos fixed