TMB Forum

ProPlex IQ Tester LV - Version 1.1.0 Release 11 January 2021

Please download file HERE!

NOTE:

Battery calibration must be performed after this update to allow for improved battery level measurement.

You can find Update instructions HERE!


What's New in Version 1.1.0:

• DMX Transmitter setting saved and loaded on power-cycle

• Added real-time clock feature (used for filesystem)

• Added pin-protected ownership message

• Added touchscreen calibration in settings menu

• Improved RDM device listing and added option to hide offline devices (on by default)

• Protocol detector moves active protocols to top of list

• PoE tests improved and results now show failure causes

• Menu can now be navigated using keypad (press central key to activate)

• Added battery storage preparation feature that charges/discharges battery to safe level for long-term storage

• Battery level measurement precision improved

• • Note: Battery calibration must be performed after firmware update

• • Discharge battery completely and allow the unit to power down itself. Leave the unit in this state for at least 5 hours

• • Then, fully charge the battery and leave it connected to charger for at least 5 hours

Bug Fixes:

• DMX transmitter now does not allow two sources for the same universe

• DMX receiver handles less than 512 channel streams properly

• DMX receiver handles sACN 0xDD start codes

• DMX receiver FPS counter erratic behavior fixed

• User interface typos fixed