Was running ping responder, backed out to the ethernet menu and the unit froze on firmware 1.0.1, however I can not get the unit to reboot, turn off, or do anything else.
Only thing I can think of is to let it drain the battery to 0% to reset.
Unit frozen
Moderators: Logan, Oisín, Dmitry
-
Ryan.gottlieb
- Posts: 9
- Joined: Wed Jul 03, 2019 8:29 am
Re: Unit frozen
Holding outside left and right got it to power off.
-
Ryan.gottlieb
- Posts: 9
- Joined: Wed Jul 03, 2019 8:29 am
Re: Unit frozen
To recreate the bug,
Had IQ Tester on small network with a computer and 2 other sACN devices, Had computer ping IQ tester, went into ping Responder, saw incoming pings, left screen on IQ tester BEFORE ending ping command on PC. Causes a crash, 75% of the time, a red box with a crash alert shows, 25% it just locks up.
If you stop incoming pings before leaving menu, no crash.
Had IQ Tester on small network with a computer and 2 other sACN devices, Had computer ping IQ tester, went into ping Responder, saw incoming pings, left screen on IQ tester BEFORE ending ping command on PC. Causes a crash, 75% of the time, a red box with a crash alert shows, 25% it just locks up.
If you stop incoming pings before leaving menu, no crash.
Re: Unit frozen
Thanks for this report, we are looking into it