DMX Thru Range

Moderators: Daniel, Oisín, Logan, Dmitry

Post Reply
hawley3
Posts: 3
Joined: Thu Feb 07, 2019 12:56 am

DMX Thru Range

Post by hawley3 » Sat Jun 08, 2019 2:45 am

Hi,

If there isn't already, would it be possible to add the ability to send all 512 channels of DMX at one time?

OR

if there was a way of sending a 'thru' range that would be also handy.

I also notice that if i am transmitting DMX and i want to get out of edit mode, you have to exit the menu. Is there a way of staying within the DMX transmit window, exiting edit mode and keep the DMX transmitting?

Thanks,
Luke

Rihards
Posts: 47
Joined: Thu Mar 14, 2019 2:06 am

Re: DMX Thru Range

Post by Rihards » Sun Jun 09, 2019 10:45 pm

Hello

Right now (version 0.6.3) it is not possible to set a value for all channels at once.
A "thru" range option should be added in version 0.8


It is possible to keep transmitting DMX and exit edit mode:
1. Open the DMX-OUT window
2. Enter edit mode with the middle button and set channel values
3. Press BACK without exiting edit mode
4. Open the DMX-OUT window again
IQ Tester / IQ Two v2.x

Post Reply