sACN Receiver Crash

Frequently Asked Questions from Customers

Moderators: Logan, Oisín, Dmitry

Post Reply
jabadger
Posts: 12
Joined: Tue Oct 27, 2020 7:18 pm

sACN Receiver Crash

Post by jabadger » Fri Nov 17, 2023 4:29 pm

Power on with ethernet connected.
DMX Receiver. One sACN universe (999) transmitted from 10.0.1.199.
Click on it to see the universe (no levels are being sent, this is normal).
Click the red 'X' to close. Tester crashes.

v1.4.0

Rihards
Posts: 48
Joined: Thu Mar 14, 2019 2:06 am

Re: sACN Receiver Crash

Post by Rihards » Fri Nov 24, 2023 5:44 am

Will be fixed in 1.4.1

In v1.4.0 this might also happen with Art-Net, RTTrPL and DMX Input Port streams
IQ Tester / IQ Two v2.x

wbrownld
Posts: 1
Joined: Wed Jan 04, 2023 11:33 am

Re: sACN Receiver Crash

Post by wbrownld » Wed Nov 29, 2023 2:02 pm

I believe that I'm having the same issue.

I can view DMX levels from sACN, but once I try to back out of the screen, it crashes and reboots.

Is it possible to downgrade my firmware back to the previous version?

Rihards
Posts: 48
Joined: Thu Mar 14, 2019 2:06 am

Re: sACN Receiver Crash

Post by Rihards » Sat Dec 02, 2023 5:31 am

A downgrade is possible, but has not been tested if it does not break any settings.
Downgrade can be done the same way you upgrade, just with the previous version firmware.bin, following the same firmware upgrade instructions

(v1.4.1 with a fix for this is done - waiting for official release)
IQ Tester / IQ Two v2.x

Post Reply