Version 1.1.0 Release Notes

Moderators: Daniel, Oisín, Logan, Dmitry

Locked
User avatar
Logan
Posts: 75
Joined: Mon Dec 17, 2018 4:54 pm

Version 1.1.0 Release Notes

Post by Logan » Mon Jan 11, 2021 1:10 pm

ProPlex IQ Tester LV - Version 1.1.0 Release 11 January 2021

Please download file HERE!

NOTE:

Battery calibration must be performed after this update to allow for improved battery level measurement.

You can find Update instructions HERE!


What's New in Version 1.1.0:
  • DMX Transmitter setting saved and loaded on power-cycle
  • Added real-time clock feature (used for filesystem)
  • Added pin-protected ownership message
  • Added touchscreen calibration in settings menu
  • Improved RDM device listing and added option to hide offline devices (on by default)
  • Protocol detector moves active protocols to top of list
  • PoE tests improved and results now show failure causes
  • Menu can now be navigated using keypad (press central key to activate)
  • Added battery storage preparation feature that charges/discharges battery to safe level for long-term storage
  • Battery level measurement precision improved
    • Note: Battery calibration must be performed after firmware update
    • Discharge battery completely and allow the unit to power down itself. Leave the unit in this state for at least 5 hours
    • Then, fully charge the battery and leave it connected to charger for at least 5 hours
Bug Fixes:
  • DMX transmitter now does not allow two sources for the same universe
  • DMX receiver handles less than 512 channel streams properly
  • DMX receiver handles sACN 0xDD start codes
  • DMX receiver FPS counter erratic behavior fixed
  • User interface typos fixed

Locked