Version 1.0.1 Release Notes

Moderators: Daniel, Oisín, Logan, Dmitry

Locked
User avatar
Logan
Posts: 75
Joined: Mon Dec 17, 2018 4:54 pm

Version 1.0.1 Release Notes

Post by Logan » Fri Sep 18, 2020 12:53 pm

ProPlex IQ Tester LV - Version 1.0.1 Release 18 September 2020

Please download file HERE!

NOTE:ProPlex IQ Tester LV running any previous firmware versions prior to v0.9.8 require Bootloader Update to prepare for newer versions of firmware. You can find Update instructions HERE

What's New in Version 1.0.1:

NETWORKING
  • Packet Lister features freezing and touch sensitive scrolling
  • New ping sender and responder mode
  • New Ethernet Link Layer Discovery Protocol (LLDP) detection
  • Expanded protocol list to discover and support more industry protocols
  • Expanded PoE test results - now detects Passive PoE, PoE (802.3af) and PoE+ (802.3at) as well as A and B wiring mode
LTC
  • Timecode can be sent or received on both XLR ports
  • LTC signal scope now viewable in timecode receiver window
RDM
  • Added RDM supported PID’s covering most of E1.20 and E1.37-1
  • New RDM “Raw PID” mode allows custom GET and SET messages
DMX
  • New DMX transmitter
      interface with multiple sources available for sending and editing DMX values
    • Virtual touch responsive faders arranged for RGB, RGBW, 4 channel or 6 channel
    • Added description for DMX Receiver Configuration universe range - it is used to set ArtPollReply and sACN multicast join range
    • DMX Output Port now defaults to Disabled on powerup
    • Added DMX Receiver sACN multicast join enable/disable toggle
    • Optional numeric CMD keypad for direct DMX value entry
    • DMX Effect Engine with editable waveform, BPM, channel selection and more
    • Full Universe Scene Editor to capture external DMX source and playback of saved scenes
    • Art-Net and sACN output now able to output universe ranges
    • New DMX receiver interface with all universes viewable in the same window
    • Additional display modes for viewing RGB and RGBW data
    GENERAL
    • Restructured user interface with improved functionality, unified style for all windows and more intuitive navigation
    • Editable fields have popup windows for data entry
    • Listed items can now be scrolled with a swipe touch gesture
    • Touchscreen is more responsive
    • New bootloader for IQ Tester – future firmware updates for units now require only USB cable connection and firmware file
    • Added Firmware utility - can now update firmware of Solaris fixtures
    • Firmware Files for Solaris fixtures are copied into IQ Tester internal memory via USB cable transfer
    • New charging and power on/off behavior - unit will stay off when charger is connected and can be turned on/off at any time by holding central keypad button
    • New automatic shutdown with configurable timeout

    Locked