Strange MAB length

Frequently Asked Questions from Customers

Moderators: Daniel, Oisín, Logan, Dmitry

Post Reply
Aki
Posts: 2
Joined: Fri May 14, 2021 8:50 pm

Strange MAB length

Post by Aki » Mon Sep 13, 2021 5:53 am

I just find strange MAB length with ETC NET3 DMX node at ACN node.
I think this numbers are too long.
Or is this correct length?
See attached file
Attachments
3A301145-1470-4CB6-9F64-4D0A2F3B1886.jpeg
3A301145-1470-4CB6-9F64-4D0A2F3B1886.jpeg (64.46 KiB) Viewed 8214 times

Rihards
Posts: 47
Joined: Thu Mar 14, 2019 2:06 am

Re: Strange MAB length

Post by Rihards » Tue Sep 14, 2021 10:44 am

The reading is not correct.
Does it still show the same value after restarting the IQ Tester?

There is a problem with the Break/MAB measurements - the measurement will stop updating after it reads a very incorrect value like this.
A restart should fix the problem for now.
This usually happens when plugging in a DMX cable while DMX data is being sent on it.
IQ Tester / IQ Two v2.x

Post Reply